New to linseed oil paint but liked the many upsides to the product. Started with a test run on a mill shed before tackling the larger barn this was mainly intended for. Travis was of great help answering questions. Started with raw wood, applied a coat of purified linseed oil first, then couple days later applied a 50/50 mix of purified linseed oil and linseed oil paint (fiddlehead). Despite challenges with central VA humidity (applied when had a few lower humidity days) working with the paint was easier than expected. A little bit goes a long way as we used thin coats taking time to spread and work the paint/oil into the wood. We did this smaller building all by brush but will try a roller on the next project, taking time to back brush to spread the paint out that will likely go on thicker. The 50/50 mix has a nice look with what appears to be adequate coverage and that at this point don't see a need to go back over with straight paint.